-
Industrial Pressure Transmitter
-
Low Cost Pressure Transmitter
-
Piezoresistive Differential Pressure Transmitter
-
Piezoresistive Pressure Sensor
-
Liquid Level Transmitter
-
Capacitive Fuel Level Sensor
-
Thin Film Pressure Sensor
-
Infrared Temperature Transmitter
-
Digital Pressure Gauge
-
Digital Flow Switch
-
Magnetostrictive Liquid Level Transmitter
-
Industrial Vibration Sensor
-
Liquid Leakage Sensor
-
Submersible Level Transmitter
-
Magnetostrictive Displacement Sensor
High Temperature High Quality DC Vacuum Compact Pressure Transmitter For Water Gas
Housing | SS304 | Pressure Port | SS304 |
---|---|---|---|
Diaphragm | SS316L | Sealing Gasket | Viton |
Plug Housing | Plastic | Cable | Polyethylene |
High Light | 20mpa Low Cost Pressure Transmitter,20mpa water level measurement sensor,SS304 water level measurement sensor |
Features
Reliable performance, easy application
Short protection and reverse polarity protection
Low cost
Compact size
Introduction
SPT21C1 is economical pressure transmitter, uses standard ceramic pressure sensor and special circuit board to make it cost effective and good performance. This product is used for measure and control of liquid or gas pressure.
Specification
Pressure range | 0~0.5…40MPa (0~5…400bar) |
Over pressure | 2 times FS |
Pressure type | Gauge |
Process connection | G1/4 male thread (or as per customer’s requirement) |
Accuracy | ±0.5%FS |
Long term stability | max. ±0.3%FS/year |
Offset thermal drift | ±0.02%FS/℃ |
Application temp. | -30~80℃ |
Storage temp. | -40~125℃ |
Power supply | 12~28VDC |
Output signal | 4~20mADC(2 wires) 0/1~5VDC(3 wires) |
Load resistance | ≤(U-12)/0.02Ω(2-wire), ≥10k(3-wire) |
Housing protection | IP65 |
Electrical connection | DIN43650 plug,M12 (or as per customer’s requirement) |
Construction and Outline Dimension
Construction material:
Housing | SS |
Pressure port | SS |
Sensor | Ceramic |
Sealing gasket | Viton |
Plug housing | Plastic |
Cable | Polyethylene |
Outline dimension: