All Products
-
Industrial Pressure Transmitter
-
Low Cost Pressure Transmitter
-
Piezoresistive Differential Pressure Transmitter
-
Piezoresistive Pressure Sensor
-
Liquid Level Transmitter
-
Capacitive Fuel Level Sensor
-
Thin Film Pressure Sensor
-
Infrared Temperature Transmitter
-
Digital Pressure Gauge
-
Digital Flow Switch
-
Magnetostrictive Liquid Level Transmitter
-
Industrial Vibration Sensor
-
Liquid Leakage Sensor
-
Submersible Level Transmitter
-
Magnetostrictive Displacement Sensor
Contact Person :
kenny
2mA Power Supply Sanitary Application 100MPa Silicon Rubber Flexible Wires Pressure Sensor
| Place of Origin | China |
|---|---|
| Brand Name | Sier |
| Certification | CE,RoHS |
| Model Number | SPT80 |
| Minimum Order Quantity | 1 |
| Price | USD20~45/Piece |
| Packaging Details | Carton |
| Delivery Time | 7 |
| Payment Terms | T/T, Western Union |
| Supply Ability | 5000 pieces each month |
Product Details
| Diaphragm | Stainless Steel 316L | Housing | Stainless Steel 316L |
|---|---|---|---|
| Pin | Kovar Or Silicon Rubber Flexible Wires | O-ring | Viton |
| Net Weight | ~16g | Overpressure | 2 Times FS |
| High Light | 70MPa Liquid Level Pressure Transmitter,19mm pressure sensor chip,70MPa sealed gauge pressure sensor |
||
Product Description
SPT80 High Stable Piezoresistive OEM Pressure Sensor
Features
·Pressure range -100kPa～0kPa～10kPa…100MPa
·Gauge, absolute, sealed gauge
·Constant current power supply
·Isolated construction, enable to measure various media
·Φ19mm standard OEM pressure sensor
·Full stainless steel 316L
·Temperature compensated 0℃～50℃
Application
·Industrial process control ·Level measurement ·Gas, liquid pressure measurement
·Pressure checking meter ·Pressure calibrator ·Liquid pressure system and switch
·Cooling equipment and air conditioning system ·Aviation and navigation inspection
Introduction
SPT80 high stable OEM sensor is the piezoresistive pressure sensor with isolated construction and precise compensation. It uses high stable silicon die. Stainless steel 316L housing with diameter Ф19mm. The measured pressure is transmitted onto silicon die through 316L diaphragm and inner media, to transform the pressure to electric signal.
SPT80 pressure sensor is inspected and screened on automatic production line, testing and checking time after time strictly. It is widely used for various pressure measurement fields.
Electric Specification
| Power supply | ≤2.0mADC |
| Electric connection | Kovar pin or 100mm silicon rubber flexible wires |
| Common mode voltage output | 50% input (typ.) |
| Input impedance | 3kΩ～6kΩ |
| Output impedance | 3kΩ～6kΩ |
| Response (10%～90%) | <1ms |
| Insulation resistor | 100MΩ, 100VDC |
| Overpressure | 2 times FS |
Construction
| Diaphragm | stainless steel 316L |
| Housing | stainless steel 316L |
| Pin | Kovar or silicon rubber flexible wires |
| O-ring | Viton |
| Net weight | ~16g |
Environment Condition
| Position effect | deviate 90° from any orientation, zero change ≤±0.05%FS |
| Shock | no change at 10gRMS,(20～2000)Hz |
| Impact | 100g,11ms |
| Media compatibility | the gas or liquid which is compatible with stainless steel and Viton |
Basic Condition
| Media temperature | (25±1)℃ |
| Environment temperature | (25±1)℃ |
| Humidity | (50%±10%)RH |
| Local air pressure | (86～106)kPa |
| Power supply | (1.5±0.0015)mADC |
Basic Specification
| Specification* | Min. | Typ. | Max. | Units |
| Linearity | ±0.15 | ±0.25 | %FS,BFSL | |
| Repeatability | ±0.05 | ±0.075 | %FS | |
| Hysteresis | ±0.05 | ±0.075 | %FS | |
| Zero output | ±1 | ±2 | mVDC | |
| FS output | 100 | 200 | mVDC | |
| Zero thermal error | ±0.5 | ±1.0 | %FS,@25℃ | |
| Span thermal error | ±0.5 | ±1.0 | %FS,@25℃ | |
| Compensated temp. range | 0～50 | ℃ | ||
| Working temp. range | -40～125 | ℃ | ||
| Storage temp. range | -55～125 | ℃ | ||
| Stability error | ±0.2 | %FS/year | ||
| *testing at basic condition | ||||
,
Order Guide
Recommended Products